Laser Marking System, Model: ALS6100
Laser marking for plastics, PCB, stainless steel, aluminium. Flat, round surfaces or continuous tape roll to roll.
Laser marking generator
- AUREL Nd-Yag with acousto-optic Q-switch
- Wave lenght 1064 nm
- Power TEMoo CW 12W
- Multimode CW 40W
- Repetition rate Single pulse to 10 KHz
- Alignment either by HeNe Laser or through collimator
- All mirrors and optical components mounted on rails with micrometric adjustment
- Vertical and horizontal alignment of the Q-switch by micrometers
Laser marking specification
| Working area | 110 x 100 mm (150 x 150 mm optional) | |
| Resolution | 1.7 μm | |
| Repeatibility | +/-15 μm |
Writing speed: 350 chr/sec. Scanner speed: ScanLab Mod. Hurryscan |
| Computer | Pentium III 450 MHz, 128 Mb RAM, CD-rom, 15″ TFT Flat monitor, Keyboard with trackball, Windows 95/98 | |
| Software | SAM Light SCAPS | |
| I/O Interfacing signal | Start/Stop marking cycle (input) Beginning/End marking cycle (output) Emergency (input) Fault (output) Piece rotation (optional) | |
Requirements
| Electrical power | 3/380V ? 20A ? 50 Hz |
| Operating temperature | 10÷40°C |
| Humidity | 85% max |
Download
'레이저 마킹' 카테고리의 다른 글
| 파이버 레이저 마킹기 (0) | 2017.02.13 |
|---|---|
| 레이저 마킹기 Fiber Laser Marking System LPM-FBB20P Series (0) | 2016.08.04 |
| Fiber Laser Marking System (0) | 2016.06.04 |
| Laser Marking System, LM-C10-AZ3100 (0) | 2014.03.17 |
| Laser Marking System for Cable Marking, Wire Stripping and Cutting (0) | 2014.03.17 |
